Ink jet printer | micro-piezo technology

- 8 heads of printing with 510 nozzles each
and drops of 30 picolitros
- Frequency of firing ink of 12.8 kHz by jet
- 71.8 mm in the print area

Until 720 dpi real

Solvent or eco-solvent

Cyan, magenta, yellow, black

Tanks princiapis: 1000 ml of fluid + corr

3200 mm

Vinyl, perforated vinyl, polyester, canvas, paper and fabric

Até 140 m²/h

Até 51 m²/h

Até 30 m²/h

Auto feed and take-up (rewind)

Automated system with positive pressure

Pre-heater, front-heater e sistema de coolers

Optical fiber cables

Printing: < 60 dB | Standby: < 40 dB

Software RIP Standard / PhotoPrint DX

Windows 2000 or XP

220 V

1400 W (220 CA)

97 x 475 x 158 cm

482 kg

Temperature 68º ~ 82ºF (20º ~ 28ºC)
Humidity 40% ~ 60%, non-condensing

		RIP Photoprint Software
		Software drive
		Take up
		Media Drier
		Fiber optic cable card
		Thermometer

Warranty 12 months for electronic boards, motors, structure and mechanical problems or defects in factory; assurance (6) for six months except clogging the print heads. There is no guarantee of wear parts such as ink filter, air filter, ink injection pump, hoses or any part of the wear machine. All type of material used in the equipment must be approved by the manufacturer or distributor of equipment, if misuse of the security of the machine is compromised.

Installation of equipment will be in place for proper use of equipment and evaluated by technical responsible. In case of problems with the structure of the environment and power grid it impossible to install, you should do all procedures specified by the distributor for installation, the installation costs of equipment will be for the client (the technical passage, lodging, meals, transportation ).